SV GSXR front, day two

Ordered some stainless T-Bolt clamps to mount the headlight bracket to the forks. The GSXR rear turn signals I put in the front still work, so I will leave them on there. Picked up a GS500 headlight from a buddy and it fit perfectly inside the SV housing. I am not a particular fan of the clear type plastic lenses on these bikes.

DSC_0811 (800x533)

Mounted the speedo offset from the stock location. Made it as tight as possible to the headlight.

DSC_0812 (800x533)

DSC_0814 (800x533)

Super clean flux core tacks (I’m going to TIG weld it later at school):

DSC_0815 (800x533)

Leave a Reply

Your email address will not be published. Required fields are marked *